英语
中文简体Floor scrubbers have been developed in China for more than ten years. In recent years, they have been very popular. They are highly sought after by factories, office buildings, cleaning companies and other companies, and their market value is getting higher and higher. For companies that try to use floor scrubbers, they usually choose hand-push scrubbers, because they are more cost-effective than driving scrubbers and are more suitable for “novices” .
As for the mechanical product of the floor scrubber, due to improper operation of the staff or careless cleaning and maintenance, various failures are prone to occur, and the floor scrubber does not produce clean water, cannot absorb clean sewage, does not rotate the brush, or push it up. It is very laborious. These are the four common problems of hand-push scrubbers.
1. The washing machine can't get clean water
When the cleaning staff are working, the scrubber suddenly does not produce clean water. First, you need to check whether there is water in the clean water tank. If there is no water, you need to add clean water here; secondly, you need to check whether the clean water pipe is blocked; These are two common phenomena that the washing machine does not produce clean water.
2. The scrubber sucks dirty sewage
When the cleaning staff finds that the scrubber is not sucking clean or not sucking sewage during work, first check whether the water in the recovery tank is full; secondly, check whether the suction pipe is blocked; secondly, check whether there is a water-absorbent strip Abrasion or improper installation; these are the three common phenomena that the scrubber sucks dirty sewage.
3. the brush does not rotate
The three common phenomena that the scrubber does not rotate are battery problems, fuse problems, and wiring failures. The battery problems are what we can find, that is, when the scrubber has been used for several years or when the battery power is low. If such a failure occurs, you need to fully charge the battery before using it.
4. push up laboriously
Nowadays scrubbers, even hand-push scrubbers, don’t have to be pushed very hard. Girls in their early twenties can easily push them. But when the scrubber is hard to push up, check the big wheels of the body. Whether it is normal and whether it is a problem with the drive system, this requires professional after-sales personnel to deal with it.
It is impossible for a machine to work without problems forever. When a machine has a problem, we can contact a professional after-sales service if it can’t be solved. How can the cleaning staff make the machine less problematic and how to improve the service life of the machine? This requires cleaning staff. Be diligent. Clean and empty the clean water tank and recovery tank after each work. The sewage pipe and clean water pipe also need to be rinsed with water. The absorbent tape is also washed and checked for wear. If there is wear, replace it in time. , And then put the scrubber on a flat ground to charge. Before each work, you need to check whether the major accessories are in good condition. In this way, the washing machine can have fewer failures, and the service life of the washing machine can be improved.
https://www.scrubbermachine.net/
