英语
中文简体Generally, the clean water filter of the driving type scrubber is installed at the front and bottom of the scrubber, so you must be very careful in the operation. We often encounter situations where customers replace the clean water filter, mainly because of improper operation and collision and rupture. Because this clean water filter is located directly below the driving scrubber, it may be encountered accidentally due to visual obstructions during the operation, especially in places where some steps are encountered. The clean water filter of the drive-on scrubber is hard plastic, which is very brittle and easily breaks when touched. The clean water filter of the driving scrubber should be protected from damage.
If you want to avoid problems with the clean water filter of the driving scrubber, you need to pay attention to the following aspects:
1. In the process of operating the driving type scrubber, pay attention to control the distance and avoid the front of the car from getting too close to obstacles;
2. When cleaning the filter, be very careful during the disassembly and assembly process, do not force it, and install it until it does not leak water, not too tight;
3. In winter, drain the clean water in the driving scrubber to avoid breaking the filter due to icing.
The clean water filter of the driving scrubber is also a very important part. Once it breaks, it must be replaced in time, otherwise it will leak continuously, which will not only affect the cleaning effect, but also affect the cleaning efficiency.
https://www.scrubbermachine.net/
