英语
中文简体Small washing machines have been widely used. Many enterprises, institutions and property communities have purchased washing machines for cleaning. Various failures are inevitable in the daily use of small washing machines, which is unavoidable. If there is a problem, then what are the common faults and solutions of the small washing machine, I hope it can help you to quickly solve the fault of the washing machine in your daily use:
1. Common faults of small washing machines: the squeegee cannot completely dry the ground Solution 1. Check whether the rubber strip is clean. 2. Adjust the inclination of the squeegee, and adjust the balance wheel until the contact angle between the absorbent strip and the ground is 45°.
2. The problem that the small washing machine does not absorb water: it may be that the suction pipe and squeegee behind the washing machine are garbage or blocked. If the water does not absorb water, check whether the drain pipe and the cover of the sewage tank are tightly covered, and whether the floating ball in the sewage tank is closed. The motor port is blocked and there is no suction. If the floating ball is sucked up to block the suction port, the floating ball can be shot down by hand.
3. The water output is small or no water is produced. If the water output of the washing machine becomes smaller or no water is produced when the washing machine is working, there are impurities in the first added clean water, which causes foreign matter to block the water outlet pipe. It is only necessary to clean the impurities in the clean water filter. Or the filter is completely blocked by impurities, or the clean water solenoid valve is damaged, and the solenoid valve can be replaced.
4. if the water absorption is not clean, it is also necessary to check whether the suction motor is working normally. Once the suction motor does not work, the cleaning efficiency will be greatly reduced.
